VEVOR Hydraulic Lift Table Cart, 1760 lb Capacity, 48 x 24 in Platform, 59 in Lift
$1,019.90Wholesale price, no minimum order
Key Features
Only 4 left in stock
Quick Answer
This double scissor hydraulic lift table is rated for 1760 lb / 800 kg and raises its 48 x 24 in / 1200 x 600 mm platform from 19.5 in to 59 in. It is operated by a foot pump with a hand release, rolls on PU casters with braked rear wheels, and has a limiter bar and a non-slip pad on the deck. Assembly of the platform and handle takes a few minutes with the supplied screws.
Description
At a Glance
Hydraulic Lift Table Cart, 1760 lb Capacity, 48 x 24 in Platform, 59 in Lift lifts 1760 lb / 800 kg on a 48 x 24 in / 1200 x 600 mm platform, from 19.5 in closed to 59 in raised. It is a manual double scissor table: you pump the pedal to raise the deck and press the release lever to lower it, so there is no motor, battery or power lead involved.
Hydraulic Lift Table Cart, 1760 lb Capacity, 48 x 24 in Platform, 59 in Lift
This is a manual hydraulic lift table rated for 1760 lb, built for moving a load at floor level and then raising it to working height. The platform measures 48 x 24 in / 1200 x 600 mm and travels from 19.5 in to 59 in. A double-scissor frame stacks two scissor sets, which is how this model reaches 59 in without a longer single arm. Everything is mechanical: a foot pedal drives the pump, and a hand lever releases pressure to lower the deck.
What the lift range covers
At 19.5 in the deck sits low enough to slide under a pallet edge or a low bench, which is the position you load in. At 59 in it lines up with bench, counter or shelf height depending on your setup. Plan the lift around the height you actually work at, not the maximum: a table that only needs to reach 30 in does not need the tallest frame in the range, and a table that must reach 59 in cannot be replaced by a low one.
How the pump and release work
The pump is integrated into the frame and driven by the foot pedal, so both hands stay on the load while the deck rises. Lowering is controlled by the release lever: press it gradually and the platform descends at a controlled rate, release it and the platform stops. Because the table is manual, there is no cord, no battery and no hydraulic power unit to maintain, and it can be used anywhere on a level floor.
Platform, casters and brakes
The deck is 48 x 24 in / 1200 x 600 mm with a non-slip pad. The cart rolls on PU casters; the rear pair carries brakes, so you position the table, step the brakes down, and only then pump. PU wheels roll quietly on concrete and do not mark sealed floors the way hard nylon wheels can.
Assembly and first lift
The platform, handle and hardware arrive unassembled. Fit the platform to the scissor arms, align the roller with its guide, and tighten the supplied screws before the first lift. Raise the empty deck once, lower it fully, and check that the release lever returns cleanly before putting a load on the table.
Safety notes for a scissor lift table
Use the table on a level, hard surface. Do not exceed the rated capacity, and keep the load centred rather than hanging over one edge. Never put hands or feet inside the scissor arms while the deck is moving, and do not roll the cart with a raised load: lower the deck, move the cart, then raise it again. Chock or brake the casters before lifting, and lower the platform before storage.
Where this model fits
Workshops use it to bring engines, gearboxes and machine parts up to bench height. Warehouses and stockrooms use it to lift totes and cartons to shelf level. Retail back rooms and supermarkets use it for case goods and restocking, and repair garages use it for wheels, brake assemblies and subframes.
Wholesale pricing
One unit, wholesale price. There is no minimum order and no separate tier price, so a single table and a multi-unit order use the same listed unit price. Price, stock and promotions on this page are the live WooCommerce values, not a quoted estimate.
Performance & Applications
Specifications
| Brand | VEVOR |
| Item Model Number | TFD80 |
| Style | Double Scissors |
| Platform Size | 48 x 24 inches /1200 x 600 mm |
| Load Capacity | 1760 lbs / 800 kg |
| Lift Range | 19.5-59 inches / 500-1500 mm |
| Pump | Hydraulic Pump |
Be the first to review “VEVOR Hydraulic Lift Table Cart, 1760 lb Capacity, 48 x 24 in Platform, 59 in Lift”
Frequently Asked Questions
Q: What can a 1760 lb hydraulic lift table handle?
A: Anything up to 1760 lb that fits on the 48 x 24 in / 1200 x 600 mm platform, provided the weight is centred. The rating is for the whole table, not per corner, so a load that overhangs one side reduces the usable margin.
Q: How high does this model lift?
A: From 19.5 in closed to 59 in fully raised, a range of 19.5 to 59 in / 500 to 1500 mm. The closed height is what matters when you slide the deck under a pallet; the maximum height is what it can reach at a bench or shelf.
Q: Is it a double scissor or a single scissor table?
A: This listing is the double scissor version, model TFD80. The double frame is what produces the taller lift range; it also raises the closed height.
Q: Does it need power or a battery?
A: No. The pump is driven by a foot pedal and released by a hand lever. There is no motor, cord or battery, so the table works anywhere it can roll on a level floor.
Q: How do you lower the platform?
A: Press the release lever and the deck descends under control. Release the lever and it stops at that height. Lower slowly with a full load rather than letting it drop.
Q: Can you move the cart with a load raised?
A: Do not. Lower the platform first, roll the cart to the new position, brake the rear casters and then lift again. A raised scissor frame is unstable once the wheels start moving.
Q: What kind of floor does it need?
A: A level, hard surface such as concrete, sealed concrete or tile. PU casters roll quietly and resist marking, but soft ground, gravel or a slope will make the table unstable under load.
Q: How much assembly is required?
A: The platform, handle and hardware are fitted on delivery. Align the platform roller with the guide, tighten the supplied screws and test the full lift and lower cycle empty before loading the table.
Q: Can it be used as a mobile workbench?
A: Yes, within the rated capacity. Many buyers use it as an adjustable-height assembly table: raise it to bench height, brake the casters and work on the deck. The non-slip pad keeps parts from sliding.
Q: How does this model compare with the rest of the range?
A: The range runs from 330 lb single-scissor carts up to the 1760 lb double-scissor table. This TFD80 sits at 1760 lb with a 59 in maximum height; step up if you need more capacity, a larger deck or a taller lift.
Questions & Answers
Related products
-
VEVOR Forklift Safety Cage, 1200 lbs Load Capacity, 36 x 36 inches Folding Forklift Work Platform with Lockable Swivel Wheels
Original price was: $189.90.$153.82Current price is: $153.82. -
VEVOR Mechanic Stool, 250 LBS Rolling Pneumatic Creeper Garage/Shop Seat, Adjustable Height 22 in-28 in Padded Rolling Workshop Stool with Tool Tray
Original price was: $37.90.$34.11Current price is: $34.11. -
VEVOR Furniture Dolly, Maximum Load 1200 lbs, Heavy Duty Furniture Movers with 5 360° Rotation Wheels, Carbon Steel Panel
Original price was: $47.90.$43.11Current price is: $43.11.
Top Rated in Material Handling
-
VEVOR 2200 lbs Attic Lift, 1600W 110V Electric Hoist with 14ft Wired Remote Control, 40ft Single Cable Lifting Height & High-quality Motor
Original price was: $159.90.$151.91Current price is: $151.91.
0 reviews for VEVOR Hydraulic Lift Table Cart, 1760 lb Capacity, 48 x 24 in Platform, 59 in Lift
Customer reviews
No reviews found