VEVOR Floor Jack, 2.5 Ton Low Profile Floor Jack, Heavy-duty Steel Racing Floor Jack With Single Piston Lift Pump
$67.90Wholesale price, no minimum order
Key Features
3.35 in (85 mm) entry height
5,500 lb / 2.5 ton capacity
14.96 in (380 mm) maximum lift
Single-piston hydraulic pump
Steel body with a detachable handle
In stock
Quick Answer
This low profile floor jack ships free from a US warehouse with 30-day returns and manufacturer warranty. It lifts 5,500 lb (2.5 tons) from a 3.35 in (85 mm) entry up to 14.96 in (380 mm), which is low enough to slide under a sports car or a sedan without driving it onto blocks first. The steel body runs a single-piston hydraulic pump, and the handle detaches for storage.
Description
At a Glance
A 2.5 ton steel racing jack built around a low entry: 3.35 in (85 mm) at rest rising to 14.96 in (380 mm). The 5,500 lb rating covers a mid-size car or SUV end, and the single-piston hydraulic pump lifts on the handle stroke. Steel keeps the body compact for the capacity, so it tucks under a low car where a taller jack will not fit.
Low Profile Floor Jack: 2.5 Ton, Steel, 3.35 in Min Height
This VEVOR racing floor jack lifts up to 5,500 lb (2.5 tons) with a hydraulic single-piston pump. The steel body works from a 3.35 in (85 mm) minimum height up to 14.96 in (380 mm), low enough to slide under sports cars and sedans.
Which Floor Jack Is This For?
For low-slung sports cars and sedans, this 2.5 ton steel jack is the mid-capacity pick in the racing line. If you want a lighter unit, the 1.5 ton aluminum-and-steel jacks are easier to carry; for 3 ton capacity with a dual piston pump, the 3 ton racing jack is the stronger option.
Low Profile Floor Jack for Reliable Garage Lifting
The VEVOR 2.5 ton low profile floor jack slides under low-clearance vehicles and lifts up to 5500 lbs for tire changes, oil changes, and brake work. A single piston hydraulic pump, steel construction, and vehicle-friendly saddle make garage and roadside lifting straightforward.
Fits Under Low Cars and Lifts Up to 14.96 in
With a minimum height of 3.35 in / 85 mm and maximum height of 14.96 in / 380 mm, the jack suits family cars, trucks, SUVs, and lowered performance vehicles. The wide range handles routine maintenance without a bulky shop lift.
Single Piston Pump with Easy Leverage
The single piston hydraulic pump raises the jack smoothly, and the 31.5 in / 800 mm handle uses leverage to make lifting easier. Steel wheels, including two universal rear wheels, let you maneuver and position the jack under the load point.
Protective, Certified, and Compact
A 360 degree rotatable rubber saddle and foam handle bumper protect the vehicle during lifting. CE, UKCA, and ASME PALD-2014 certified construction includes an overload safety system, and the two-piece handle disassembles for compact storage.
Performance & Applications
Key Features
Specifications
| Brand | VEVOR |
| Model | S385 |
| Lift Weight Capacity | 5500 LBS/2.5 Tons |
| Load Bearing Method | Hydraulic Single Pump |
| Material | Steel |
| Minimum Height | 3.35"/85 mm |
| Maximum Height | 14.96"/380 mm |
Be the first to review “VEVOR Floor Jack, 2.5 Ton Low Profile Floor Jack, Heavy-duty Steel Racing Floor Jack With Single Piston Lift Pump”
Frequently Asked Questions
Q: What is a low profile floor jack for?
A: Getting under a car that a standard jack will not fit beneath. Standard jacks start around 5 in; low profile jacks start at 3 to 3.5 in, which is the difference between sliding under a lowered car and driving it up onto blocks.
Q: How do I know if my car needs a low profile jack?
A: Measure the clearance at the jack point, not at the bumper. If the gap is under about 5 in, a standard jack will not clear it, and at 3.35 in this one will. Add a little margin for the saddle height rather than measuring to the millimetre.
Q: What size floor jack do I need?
A: As a rule of thumb, pick a jack rated for at least three quarters of the vehicle's total weight, because a floor jack lifts one end at a time. A 2.5 ton jack is comfortable under most sedans and crossovers; heavier trucks and SUVs want 3 tons or more.
Q: How do I refill a hydraulic floor jack?
A: Lower the jack completely, unbolt the fill plug on the reservoir, and top it up with hydraulic jack oil until it reaches the base of the plug hole, then refit the plug. Never substitute brake fluid or engine oil, and top up with the ram down so you are not measuring air.
Q: Which oil goes in a floor jack?
A: Hydraulic jack oil, which is a light ISO 32-grade mineral hydraulic oil. It is a sealed system, so if the level drops there is usually a slow leak to find rather than a routine top-up to schedule.
Q: Can I work under a car supported only by the jack?
A: No. A floor jack lifts a car; jack stands hold it. Set the car on rated stands at the manufacturer's jack points, lower the jack so it is just touching, and only then go underneath.
Q: Where do I place the jack under the car?
A: On the manufacturer's jack points, usually a reinforced seam or a labelled pad near each wheel. The floor pan, the sills and the plastic cladding are not jacking points, and a saddle that misses a pinch weld can fold it.
Q: Does the handle come off for storage?
A: Yes. The handle detaches, so the jack stores against a wall or under a bench instead of taking a permanent slot in the middle of the floor.
Questions & Answers
Related products
-
VEVOR Rolling Creeper Garage/Shop Seat, 250 LBS Capacity Padded Rolling Workshop Stool with Tool Tray Storage, Mechanic Stool for Garage, Shop
Original price was: $27.90.$22.32Current price is: $22.32. -
VEVOR 3/8″ Drive Impact Socket Set, SAE 1/4″-3/4″ and Metric 6-19mm 90 Piece Socket Set, 6 Point Cr-Mo Alloy Steel for Auto Repair
Original price was: $111.90.$73.52Current price is: $73.52. -
VEVOR Rubber Cable Guard, 3-Channel, 2 x 2.3 in – Durable Cord Protection Ramp for Driveways, 6600 lbs Capacity
Original price was: $56.90.$50.64Current price is: $50.64.
Top Rated in Automotive Tools
-
VEVOR Electric Car Jack, 5 Ton/11023 LBS Hydraulic Jack with Electric Impact Wrench, Portable Car Lift with Built-in Inflatable Pump
Original price was: $108.90.$97.91Current price is: $97.91. -
VEVOR 3 Ton Jack Stands, 6,600 lb per Stand, 10.8-16.3 in, Ratchet Lock, Pair
Original price was: $32.90.$28.99Current price is: $28.99. -
VEVOR PTO Shaft 1 3/8″ PTO Drive Shaft, 6 Spline End Round End PTO Driveline Shaft, Series 4 Tractor PTO Shaft, 39″-55″ Brush Hog PTO Shaft
Original price was: $90.90.$81.81Current price is: $81.81. -
VEVOR 5-Piece Needle Nose Pliers, 11 in Long Needle Nose Pliers Set, Diagonal Cutting Pliers, 45°/ 90° Bent Nose Plier, Round Nose Plier
Original price was: $29.90.$23.99Current price is: $23.99. -
VEVOR 5 Channel Cable Protectors Extreme Rubber Cable Ramps Heavy Duty Protective Cable Wire Cord Ramp Driveway Rubber Traffic Speed Bumps Cable
Original price was: $42.90.$40.76Current price is: $40.76.
New Arrivals in Automotive Tools
-
VEVOR Tap and Die Set, 116-Piece Include Metric and SAE Size, Bearing Steel Taps and Dies
Original price was: $88.90.$80.01Current price is: $80.01. -
VEVOR Hydraulic Bottle Jack, 20 Ton (44092 lbs) Capacity, 8.9-17.1 Inch Lifting Range, Heavy Duty Welded Bottle Jack for Car, SUV, Pickup
Original price was: $42.90.$40.75Current price is: $40.75.
0 reviews for VEVOR Floor Jack, 2.5 Ton Low Profile Floor Jack, Heavy-duty Steel Racing Floor Jack With Single Piston Lift Pump
Customer reviews
No reviews found