VEVOR Electric Trailer Brake Assembly, 12 x 2 Inch, 1 Pair Self-Adjusting Electric Brakes Kit for 6000 lbs Trailer Axle

Description

12 x 2 in Brake Kit with 2 Drums for 6,000 lb Axles

This VEVOR electric trailer brake kit is rated for 6,000 lb (2,722 kg) axles and includes a single set with 2 brake shoes and 2 brake drums. The 12 x 2 in (304.8 x 50.8 mm) self-adjusting assemblies use gray cast iron, SPHC, and Q235 and mount on a 5-bolt flange with a 3.9 in (99 mm) PCD and 5-Φ10 mm bolt holes.

Which Trailer Weight Is This For?

For 6,000 lb axles, this is the brake-and-drum package in the 12″ line, so the swap is bolt-on in one order. If your drums are already good, the brake-only 12″ x 2″ assemblies are the lighter order; for 7,000 lb axles the same 12″ x 2″ brakes are rated one step higher, and the 12.25 x 3.375 in kits handle 8,000-10,000 lb loads.

See the VEVOR Electric Trailer Brake Assembly Brake&Drum 6000lbs in Action

Self-Adjusting 12×2 Inch Electric Trailer Brake Assembly Eliminates Manual Brake Gap Maintenance

This electric trailer brake assembly features automatic brake adjustment technology that maintains the correct brake gap throughout its service life. So you do not have to check the brakes or make hand adjustments. The 12×2-inch brake configuration with 12-inch drums stops 6,000-pound trailers efficiently, and the self-adjusting system accounts for pad wear that naturally occurs during use.

Heavy-Duty 6000 Pound Capacity with 0.48 Friction Coefficient GG-Level Pads

The strong design can handle trailer loads of up to 6,000 pounds, and the semi-metallic brake pads have a friction coefficient of 0.48 at the GG level for strong, reliable stopping power. These heat-resistant pads maintain consistent friction characteristics during heavy-load operation, downhill braking, and frequent stopping scenarios. They also make less noise when they are in use than regular materials.

Complete Pre-Assembled Kit with Gray Cast Iron Drums and Steel Assemblies

The complete kit includes two brake systems and two brake drums, made of gray cast iron and SPHC/Q235 steel to ensure they last as long as possible. Each assembly comes preassembled, with the core parts in place. All that needs to be done is adding grease and completing the final fitting. The gray cast iron drums are better at transferring heat and keeping their shape than regular materials.

Universal 5-Hole Mounting Electric Trailer Brake Assembly with AL-KO, Dexter, and Lippert Compatibility

The standard 5-hole flange mounting with a 3.9-inch PCD and a 5-Φ10 bolt pattern works with axles from AL-KO, Dexter, Lippert, and other well-known brands. Standard trailer hub setups can use the 6-bolt drum pattern with a 5.5-inch PCD and 1/2-20 UNF threading without any changes.

Performance & Applications