1000 CFM Floor Blower, 1/4 HP Air Mover

Description

At a Glance

This floor blower moves 600 / 800 / 1000 CFM on three speed settings and tilts to 0, 20, 45 and 90 degrees. It has a timer of up to 3 hours, a 10 ft / 3 m power cord and a 1/4 HP, 115 V, 60 Hz motor. It also has two 115 V accessory outlets, but do not assume the extra load is safe on a shared circuit. Use it for drying floors and carpets, moving air in a room or helping ventilate a workspace.

BL-180Item Model Number1/4 HP, 115 V, 60 HzPower600 / 800 / 1000 CFMAir Volume1450 RPMFan Speed0, 20, 45 and 90 degreesAdjustable AnglesUp to 3 hoursTimer10 ft / 3 mPower Cord9.3 lb / 4.2 kgNet Weight13 x 10.2 x 13 in / 330 x 260 x 335 mmProduct DimensionsETLCertificationTwo built-in 115 V outletsAccessory Outlets

1/4 HP 1000 CFM Floor Blower

What is in the box: the assembled floor blower and user manual. The unit includes its 10 ft / 3 m power cord; extension cords and drying equipment are not included.

CFM, speed and air movement

The listed airflow is 600 / 800 / 1000 CFM across three speeds. CFM describes air volume rather than temperature, so the blower does not need a heat setting to help move moisture-laden air away from a surface. It runs at 1450 RPM on the highest setting with a 1/4 HP, 115 V, 60 Hz motor. Use the lowest speed for a small room or a loose object that should not be blown around, and raise it when the floor area is larger.

Positioning for floors and carpets

Set the outlet at 0, 20, 45 and 90 degrees and aim it along the surface instead of blowing straight into a wall. A blower works best when air can enter at the back, pass across the wet area and leave the room. Open a door or window when ventilating, keep furniture away from the intake and make sure the unit sits level before turning it on.

Air circulation for rooms and carpets

Place the blower at one edge of the wet area and give the moist air a way out, such as an open door, window or opposite doorway. With the outlet angled just above the floor, air passes over carpet or tile and pushes damp air toward the exit. In a closed room the blower moves air but cannot remove the moisture, so watch for condensation and ventilate or use a dehumidifier when the room stays humid. For carpet cleaning, keep the airflow moving across the carpet instead of blasting one spot, and protect furniture and loose paper from the draft.

Timer and outlets

The timer can run for up to three hours, which lets you leave a drying job on a set schedule. The two built-in 115 V outlets can connect another compatible air mover or a small device. Check the total current before adding a load, and do not plug wet or damaged equipment into the blower.

Electrical safety

Use a grounded GFCI-protected outlet near water and keep the 10 ft / 3 m cord out of puddles and walkways. Never move the unit by pulling the cord, and unplug it before clearing the fan or wiping the housing.

Carry and storage

The blower weighs 9.3 lb / 4.2 kg and measures 13 x 10.2 x 13 in / 330 x 260 x 335 mm. Let it cool, remove surface dust, check the intake and outlet and wrap the cord loosely. Store it upright in a dry place with the vents unobstructed.

Wholesale pricing

One unit, wholesale pricing. The listed price is the wholesale rate for one floor blower. There is no minimum order quantity and no separate tier price, so buying one unit and buying several units use the same listed unit price.

Performance & Applications

3 Speeds Settings1/4 HP Copper MotorAdjustable Timer

››‹‹‹

1000 CFM floor blower airflow across a wet floor

compact 1/4 HP floor blower with strong airflow

three-hour timer on the orange carpet dryer

Adjustable AngleBuilt-in Outlets

›‹‹

four angle positions on the 1000 CFM floor blower

two 115V outlets on the orange floor blower

Home UseWorkshopDecoration

››‹‹‹

orange floor blower drying a tiled bathroom floor

1/4 HP floor blower moving air across wood flooring

orange floor blower helping dry a painted room

Key Features

adjustable angle on the compact floor blower

Impact Resistant

carrying the 9.3 lb orange floor blower by its handle

Take on the go

speed control and outlets on the 1/4 HP floor blower

Adjustable Speed

Specifications

Brand	VEVOR
Item Model Number	BL-180
Air Volume	600 / 800 / 1000 CFM
Power	1/4 hp, 115 V/ 60 Hz
Speed	1450 RPM
Adjustable Angle	0°, 20°, 45°, 90°
Certification	ETL

0 reviews for VEVOR 1/4 HP Floor Blower, 1000 CFM Air Mover with 3 Speeds, 4 Angles and Two 115V Outlets

Customer reviews

No reviews found

No reviews match your current filters. Try adjusting or clearing your filters to see more reviews.

Be the first to review “VEVOR 1/4 HP Floor Blower, 1000 CFM Air Mover with 3 Speeds, 4 Angles and Two 115V Outlets” Cancel reply

Your email address will not be published. Required fields are marked *

Review Title (optional) 0 / 100

Your rating *

Your review *

Add Photos/Videos (optional)

Drag & drop files here or browse

Images: up to 5 files, max 5MB each | Videos: up to 2 files, max 50MB each, 60 sec max

Name

Post this review anonymously

Frequently Asked Questions

Q: What is a floor blower used for?

A: A floor blower, also called an air mover or carpet dryer, directs a high-volume stream of air across a floor, carpet or room. It is useful after cleaning, a spill, painting, ventilation work and drying hard-to-reach floor areas.

Q: What does CFM mean here?

A: The listed airflow is 600 / 800 / 1000 CFM. CFM describes air volume, not heating power: a higher number moves more air, while the shape of the outlet and the distance to the wet surface still affect drying speed.

Q: How many speeds does it have?

A: It has three speeds. Start on the lower setting for a small room or a delicate job, then use the higher setting when you need more airflow across a larger floor area.

Q: What angles can it blow?

A: The housing adjusts to 0, 20, 45 and 90 degrees. Set the outlet toward the wet surface and keep the intake clear; changing the angle is often more effective than moving the whole unit closer.

Q: Does it have a timer?

A: The timer can be set for up to three hours. The blower can also remain switched on without using the timer, so choose the mode that fits the room and do not leave a wet electrical appliance unattended.

Q: Can it connect to another blower?

A: Yes. This model has two built-in 115 V outlets. They can be used for another compatible air mover or a small device, but the total load must stay within the circuit rating and the outlet must remain dry.

Q: Can it dry carpet after cleaning?

A: Yes, moving air across the carpet and underneath edges helps evaporate moisture. For deep water damage, use the blower as part of a drying setup, not as a substitute for extraction, ventilation or professional restoration.

Q: Can I use it near water?

A: Use a GFCI-protected outlet, keep the plug and cord out of standing water, and never touch the plug with wet hands. Unplug the unit before moving it or cleaning around the fan.

Q: How do I move and store it?

A: The unit weighs 9.3 lb / 4.2 kg and has a carry handle. Let it cool, wipe off dust, wrap the cord loosely and store it upright in a dry place with the intake and outlet clear.

Q: What should I check if airflow drops?

A: Check the intake screen, outlet and surrounding floor for dust, lint or blocked airflow. Unplug the unit before clearing debris; if the motor still runs poorly or the breaker trips, stop using it and have it checked.