SupplyDirectHub

Loading

  • SupplyDirectHub

    Help & Support

    We are here to help you shop with confidence.

    Customer Service

    Store Policies

    Free US ShippingFree to the 48 contiguous US states
    30-Day ReturnsSimple, buyer-friendly policy
    Secure CheckoutEncrypted payment processing

    Follow Us

VEVOR 1/2 HP Floor Blower, 2600 CFM Air Mover with 3 Speeds, 4 Angles and 3-Hour Timer

VEVOR 1/2 HP Floor Blower, 2600 CFM Air Mover with 3 Speeds, 4 Angles and 3-Hour Timer

$144.90Wholesale price, no minimum order

Wind Direction Angle:
0°、 20°、45°、90°0°、20°、90°300°

Key Features

1500 / 2050 / 2600 CFM across three speeds
select the airflow you need instead of running the largest setting for every drying or ventilation job.
Four tilt positions
set the outlet to 0, 20, 45 and 90 degrees so the airflow can follow a floor, wall or ceiling instead of bouncing off the first obstruction.
Three-hour timer
set a run time and let the blower stop instead of returning to switch it off manually.
Carry-ready floor unit
the 23.4 lb / 10.6 kg body has a handle and sits on a stable base; the 20 ft / 6 m power cord adds working reach.
ETL-listed 115 V motor
the floor blower is supplied for a standard US grounded circuit and runs at 1800 RPM on the highest setting.

In stock

Genuine ProductWholesale Price, No MinimumSame Manufacturer WarrantyShips from US Warehouse
We accept: VisaMCAmexDiscover
We accept:VISAMCAMEXDISC
Free US ShippingFree to the 48 contiguous US states
Ships in 1-2 Business DaysStandard delivery in 2-6 business days
30-Day ReturnsEasy returns for peace of mind
Manufacturer WarrantyCovered by the VEVOR warranty

Authorized VEVOR ResellerGenuine, factory sealed VEVOR stock

What's in the Box?
  • 1 assembled 1/2 HP 2600 CFM Floor Blower
  • 1 built-in 20 ft / 6 m power cord
  • 1 user manual
📦 Free shipping to the 48 contiguous US states · Ships within 1-3 business days, arrives in 2-5 business days · 30-day returns and manufacturer warranty
SKU: FXZXDMGFJ1800S8XLV1 Category:

Quick Answer

This floor blower moves 1500 / 2050 / 2600 CFM on three speed settings and tilts to 0, 20, 45 and 90 degrees. It has a timer of up to 3 hours, a 20 ft / 6 m power cord and a 1/2 HP, 115 V, 60 Hz motor. Use it for drying floors and carpets, moving air in a room or helping ventilate a workspace.

Description

At a Glance

This floor blower moves 1500 / 2050 / 2600 CFM on three speed settings and tilts to 0, 20, 45 and 90 degrees. It has a timer of up to 3 hours, a 20 ft / 6 m power cord and a 1/2 HP, 115 V, 60 Hz motor. Use it for drying floors and carpets, moving air in a room or helping ventilate a workspace.

CL-370-MItem Model Number1/2 HP, 115 V, 60 HzPower1500 / 2050 / 2600 CFMAir Volume1800 RPMFan Speed0, 20, 45 and 90 degreesAdjustable AnglesUp to 3 hoursTimer20 ft / 6 mPower Cord23.4 lb / 10.6 kgNet Weight19.3 x 18.9 x 15.7 in / 490 x 480 x 400 mmProduct DimensionsETLCertification

1/2 HP 2600 CFM Floor Blower

This floor blower moves 1500 / 2050 / 2600 CFM on three speed settings and tilts to 0, 20, 45 and 90 degrees. It has a timer of up to 3 hours, a 20 ft / 6 m power cord and a 1/2 HP, 115 V, 60 Hz motor. Use it for drying floors and carpets, moving air in a room or helping ventilate a workspace.

1/2 HP blue floor blower air mover for drying a hallway floor

What is in the box: the assembled floor blower and user manual. The unit includes its 20 ft / 6 m power cord; extension cords and drying equipment are not included.

CFM, speed and air movement

The listed airflow is 1500 / 2050 / 2600 CFM across three speeds. CFM describes air volume rather than temperature, so the blower does not need a heat setting to help move moisture-laden air away from a surface. It runs at 1800 RPM on the highest setting with a 1/2 HP, 115 V, 60 Hz motor. Use the lowest speed for a small room or a loose object that should not be blown around, and raise it when the floor area is larger.

Positioning for floors and carpets

Set the outlet at 0, 20, 45 and 90 degrees and aim it along the surface instead of blowing straight into a wall. A blower works best when air can enter at the back, pass across the wet area and leave the room. Open a door or window when ventilating, keep furniture away from the intake and make sure the unit sits level before turning it on.

Air circulation for rooms and carpets

Place the blower at one edge of the wet area and give the moist air a way out, such as an open door, window or opposite doorway. With the outlet angled just above the floor, air passes over carpet or tile and pushes damp air toward the exit. In a closed room the blower moves air but cannot remove the moisture, so watch for condensation and ventilate or use a dehumidifier when the room stays humid. For carpet cleaning, keep the airflow moving across the carpet instead of blasting one spot, and protect furniture and loose paper from the draft.

Timer and outlets

The timer can run for up to three hours, which lets you leave a drying job on a set schedule. This model does not list an accessory outlet. Plug it directly into a suitable grounded circuit and keep the connection off the wet floor.

Electrical safety

Use a grounded GFCI-protected outlet near water and keep the 20 ft / 6 m cord out of puddles and walkways. Never move the unit by pulling the cord, and unplug it before clearing the fan or wiping the housing.

Carry and storage

The blower weighs 23.4 lb / 10.6 kg and measures 19.3 x 18.9 x 15.7 in / 490 x 480 x 400 mm. Let it cool, remove surface dust, check the intake and outlet and wrap the cord loosely. Store it upright in a dry place with the vents unobstructed.

Wholesale pricing

One unit, wholesale pricing. The listed price is the wholesale rate for one floor blower. There is no minimum order quantity and no separate tier price, so buying one unit and buying several units use the same listed unit price.

Performance & Applications

Key Features

impact-resistant housing on the 1/2 HP carpet dryer
Impact Resistant
carrying the compact blue floor blower by its handle
Take on the go
adjustable speed dial on the 2600 CFM floor blower
Adjustable Speed

1/2 HP floor blower dimensions, weight and airflow specifications

Specifications

BrandVEVOR
Item Model NumberCL-370-M
Air Volume1500 / 2050 / 2600 CFM
Power1/2 hp, 115 V/ 60 Hz
Speed1800 RPM
Adjustable Angle0°, 20°, 45°, 90°
CertificationETL

0 reviews for VEVOR 1/2 HP Floor Blower, 2600 CFM Air Mover with 3 Speeds, 4 Angles and 3-Hour Timer

Customer reviews

No reviews found

No reviews match your current filters. Try adjusting or clearing your filters to see more reviews.

Be the first to review “VEVOR 1/2 HP Floor Blower, 2600 CFM Air Mover with 3 Speeds, 4 Angles and 3-Hour Timer”

Your email address will not be published. Required fields are marked *

0 / 100

Drag & drop files here or browse

Images: up to 5 files, max 5MB each | Videos: up to 2 files, max 50MB each, 60 sec max

Frequently Asked Questions

Q: What is a floor blower used for?

A: A floor blower, also called an air mover or carpet dryer, directs a high-volume stream of air across a floor, carpet or room. It is useful after cleaning, a spill, painting, ventilation work and drying hard-to-reach floor areas.

Q: What does CFM mean here?

A: The listed airflow is 1500 / 2050 / 2600 CFM. CFM describes air volume, not heating power: a higher number moves more air, while the shape of the outlet and the distance to the wet surface still affect drying speed.

Q: How many speeds does it have?

A: It has three speeds. Start on the lower setting for a small room or a delicate job, then use the higher setting when you need more airflow across a larger floor area.

Q: What angles can it blow?

A: The housing adjusts to 0, 20, 45 and 90 degrees. Set the outlet toward the wet surface and keep the intake clear; changing the angle is often more effective than moving the whole unit closer.

Q: Does it have a timer?

A: The timer can be set for up to three hours. The blower can also remain switched on without using the timer, so choose the mode that fits the room and do not leave a wet electrical appliance unattended.

Q: Can it connect to another blower?

A: No accessory outlet is listed for this model. Plug it directly into a suitable grounded circuit and do not assume there is a pass-through socket.

Q: Can it dry carpet after cleaning?

A: Yes, moving air across the carpet and underneath edges helps evaporate moisture. For deep water damage, use the blower as part of a drying setup, not as a substitute for extraction, ventilation or professional restoration.

Q: Can I use it near water?

A: Use a GFCI-protected outlet, keep the plug and cord out of standing water, and never touch the plug with wet hands. Unplug the unit before moving it or cleaning around the fan.

Q: How do I move and store it?

A: The unit weighs 23.4 lb / 10.6 kg and has a carry handle. Let it cool, wipe off dust, wrap the cord loosely and store it upright in a dry place with the intake and outlet clear.

Q: What should I check if airflow drops?

A: Check the intake screen, outlet and surrounding floor for dust, lint or blocked airflow. Unplug the unit before clearing debris; if the motor still runs poorly or the breaker trips, stop using it and have it checked.

Questions & Answers