Hydraulic Lift Table, 500 lb, Guard Bars

Description

At a Glance

Hydraulic Lift Table, 500 lb Capacity, 47.2 in Lift, Double Scissor with Guard Bars lifts 500 lb / 230 kg on a 28 x 18 in / 700 x 450 mm platform, from 11.8 in closed to 47.2 in raised. It is a manual double scissor table: you pump the pedal to raise the deck and press the release lever to lower it, so there is no motor, battery or power lead involved.

TFD20Item Model NumberDouble scissorStyle500 lb / 230 kgLoad Capacity28 x 18 in / 700 x 450 mmPlatform Size11.8 to 47.2 in / 300 to 1200 mmLift RangeManual hydraulic foot pumpPumpPU casters, rear pair with brakesWheelsPowder-coated steel, orangeFinish

Hydraulic Lift Table, 500 lb Capacity, 47.2 in Lift, Double Scissor with Guard Bars

This is a manual hydraulic lift table rated for 500 lb, built for moving a load at floor level and then raising it to working height. The platform measures 28 x 18 in / 700 x 450 mm and travels from 11.8 in to 47.2 in. A double-scissor frame stacks two scissor sets, which is how this model reaches 47.2 in without a longer single arm. Everything is mechanical: a foot pedal drives the pump, and a hand lever releases pressure to lower the deck.

What the lift range covers

At 11.8 in the deck sits low enough to slide under a pallet edge or a low bench, which is the position you load in. At 47.2 in it lines up with bench, counter or shelf height depending on your setup. Plan the lift around the height you actually work at, not the maximum: a table that only needs to reach 30 in does not need the tallest frame in the range, and a table that must reach 59 in cannot be replaced by a low one.

How the pump and release work

The pump is integrated into the frame and driven by the foot pedal, so both hands stay on the load while the deck rises. Lowering is controlled by the release lever: press it gradually and the platform descends at a controlled rate, release it and the platform stops. Because the table is manual, there is no cord, no battery and no hydraulic power unit to maintain, and it can be used anywhere on a level floor.

Platform, casters and brakes

The deck is 28 x 18 in / 700 x 450 mm with a non-slip pad. The cart rolls on PU casters; the rear pair carries brakes, so you position the table, step the brakes down, and only then pump. PU wheels roll quietly on concrete and do not mark sealed floors the way hard nylon wheels can.

Guard bars on both sides

The supplier fits guard bars along both sides of the platform on this model. They give the load a physical edge to sit against and keep hands away from the scissor arms as the deck rises. They are not a substitute for strapping an uneven load.

Assembly and first lift

The platform, handle and hardware arrive unassembled. Fit the platform to the scissor arms, align the roller with its guide, and tighten the supplied screws before the first lift. Raise the empty deck once, lower it fully, and check that the release lever returns cleanly before putting a load on the table.

Safety notes for a scissor lift table

Use the table on a level, hard surface. Do not exceed the rated capacity, and keep the load centred rather than hanging over one edge. Never put hands or feet inside the scissor arms while the deck is moving, and do not roll the cart with a raised load: lower the deck, move the cart, then raise it again. Chock or brake the casters before lifting, and lower the platform before storage.

Where this model fits

Workshops use it to bring engines, gearboxes and machine parts up to bench height. Warehouses and stockrooms use it to lift totes and cartons to shelf level. Retail back rooms and supermarkets use it for case goods and restocking, and repair garages use it for wheels, brake assemblies and subframes.

Wholesale pricing

One unit, wholesale price. There is no minimum order and no separate tier price, so a single table and a multi-unit order use the same listed unit price. Price, stock and promotions on this page are the live WooCommerce values, not a quoted estimate.

Performance & Applications

Sturdy and DurableHeight AdjustableSecurity Guard

››‹‹‹

load capacity graphic for the 500 lb Double Scissor Lift Table

28 x 18 in platform and lift height of the 500 lb Double Scissor Lift Table

PU casters and rear wheel brake on the 500 lb Double Scissor Lift Table

Easy InstallationEffortless OperationEasy to Move

››‹‹‹

limiter bar and non-slip pad on the 500 lb Double Scissor Lift Table

assembly steps for the platform on the 500 lb Double Scissor Lift Table

500 lb Double Scissor Lift Table used in a warehouse and workshop

FactorySupermarketWarehouseRepair Garage

›››‹‹‹‹

dimension drawing of the 500 lb Double Scissor Lift Table

500 lb Double Scissor Lift Table side view with the platform lowered

detail view of the 500 lb Double Scissor Lift Table frame and pump

deck detail on the 500 lb Double Scissor Lift Table

Key Features

500 lb Double Scissor Lift Table product photo

Smooth Edges, Minimizes Scratching and Injury Risks

detail photo of the 500 lb Double Scissor Lift Table 1

Equipped with Fixed Adhesive Stickers

detail photo of the 500 lb Double Scissor Lift Table 2

4 in Smooth, Wear-resistant PU Casters

Specifications

Brand	VEVOR
Item Model Number	TFD20
Color	Orange
Tabletop Size	28 x 18 in / 700 x 450 mm
Lift Height	11.8-47.2 in / 300-1200 mm
Product Length with Armrest	35 in / 890 mm
Product Length with Footrest	40.2 in / 1020 mm

0 reviews for VEVOR Hydraulic Lift Table, 500 lb Capacity, 47.2 in Lift, Double Scissor with Guard Bars

Customer reviews

No reviews found

No reviews match your current filters. Try adjusting or clearing your filters to see more reviews.

Be the first to review “VEVOR Hydraulic Lift Table, 500 lb Capacity, 47.2 in Lift, Double Scissor with Guard Bars” Cancel reply

Your email address will not be published. Required fields are marked *

Review Title (optional) 0 / 100

Your rating *

Your review *

Add Photos/Videos (optional)

Drag & drop files here or browse

Images: up to 5 files, max 5MB each | Videos: up to 2 files, max 50MB each, 60 sec max

Name

Post this review anonymously

Frequently Asked Questions

Q: What can a 500 lb hydraulic lift table handle?

A: Anything up to 500 lb that fits on the 28 x 18 in / 700 x 450 mm platform, provided the weight is centred. The rating is for the whole table, not per corner, so a load that overhangs one side reduces the usable margin.

Q: How high does this model lift?

A: From 11.8 in closed to 47.2 in fully raised, a range of 11.8 to 47.2 in / 300 to 1200 mm. The closed height is what matters when you slide the deck under a pallet; the maximum height is what it can reach at a bench or shelf.

Q: Is it a double scissor or a single scissor table?

A: This listing is the double scissor version, model TFD20. The double frame is what produces the taller lift range; it also raises the closed height.

Q: Does it need power or a battery?

A: No. The pump is driven by a foot pedal and released by a hand lever. There is no motor, cord or battery, so the table works anywhere it can roll on a level floor.

Q: How do you lower the platform?

A: Press the release lever and the deck descends under control. Release the lever and it stops at that height. Lower slowly with a full load rather than letting it drop.

Q: Can you move the cart with a load raised?

A: Do not. Lower the platform first, roll the cart to the new position, brake the rear casters and then lift again. A raised scissor frame is unstable once the wheels start moving.

Q: What kind of floor does it need?

A: A level, hard surface such as concrete, sealed concrete or tile. PU casters roll quietly and resist marking, but soft ground, gravel or a slope will make the table unstable under load.

Q: How much assembly is required?

A: The platform, handle and hardware are fitted on delivery. Align the platform roller with the guide, tighten the supplied screws and test the full lift and lower cycle empty before loading the table.

Q: Can it be used as a mobile workbench?

A: Yes, within the rated capacity. Many buyers use it as an adjustable-height assembly table: raise it to bench height, brake the casters and work on the deck. The non-slip pad keeps parts from sliding.

Q: How does this model compare with the rest of the range?

A: The range runs from 330 lb single-scissor carts up to the 1760 lb double-scissor table. This TFD20 sits at 500 lb with a 47.2 in maximum height; step up if you need more capacity, a larger deck or a taller lift.