Description
At a Glance
12 x 20 ft grey carport replacement fabric for a peak-roof frame. Fits 600-610 cm / 19.69-20.01 ft long and 362-366 cm / 11.88-12.01 ft wide, with a maximum height of 301 cm / 9.88 ft. Sidewall set only; frame not included.
12 x 20 ft Carport Side Wall Set, Top Not Included
This grey sidewall set closes in a 12 x 20 ft carport frame and gives the front a zippered entry. It is the part to replace when the roof is still serviceable but the side panels are torn, faded, or missing.

Top cover and frame not included. This listing is the sidewall set only. The replacement roof cover and the metal frame are sold separately. VEVOR also states that these panels are not suitable for arch-shaped frames.
What the sidewall set adds
The set closes in the sides of a compatible carport and provides a four-panel front entry with a dual zipper structure. The dual zippers let you open the entry partway instead of choosing between fully open and fully closed. The panels attach to the frame with aluminum eyelets and ball bungees.
Frame fit
Use the published frame range, not only the 12×20 label. Measure the frame at the base and at the roof, and check the side height and slope as well.
- Frame length: 600-610 cm / 19.69-20.01 ft
- Frame width: 362-366 cm / 11.88-12.01 ft
- Maximum total height: 301 cm / 9.88 ft
- Maximum side height: 200 cm / 6.56 ft
- Maximum slope length: 204 cm / 6.69 ft
Fabric and weather
VEVOR uses PE woven fabric for the sidewall panels, with 48 aluminum eyelets. The supplier’s sidewall graphic lists a 16 x 16 weave and 16 MIL thickness. The set weighs 16.3 lb / 7.4 kg. VEVOR lists the material as waterproof and stretch resistant.
Zippers, seams, and eyelets are the places where water can get in. Keep the panels tensioned, close the entry when the carport is unattended, and check the lower edge after wind and rain.
Installation
- Inspect the frame and remove sharp edges or loose hardware before hanging the panels.
- If you are also replacing the top, install the top cover first. The sidewalls hang from the frame and should not be used to pull the frame square.
- Align the front entry with the end of the carport you want to use, then attach the panels with the ball bungees through the eyelets.
- Tension the panels evenly from the middle outward. Leave enough slack for the zipper to run without straining.
Wind and door use
An open panel catches wind. Close and secure the entry when the carport is unattended, and do not leave panels partly zipped in strong wind. In snow, brush the panels off rather than letting snow sit against the fabric.
Why this version
This is the 12 x 20 sidewall set. It uses 48 eyelets and weighs 16.3 lb / 7.4 kg. Match it to the 12 x 20 top and check the frame width; the 10 x 20 sidewalls are about 60 cm narrower and will not line up with a 12 x 20 frame.
Ordering
One set, wholesale pricing. The listed price is our wholesale rate for one sidewall set. There is no minimum order quantity and no separate tier price, so you can order one set to repair a single carport or several sets for a row of frames at the same unit price.
Performance & Applications

























0 reviews for VEVOR 12 x 20 ft Carport Side Wall Set, Grey, Zippered Front Entry
Customer reviews
No reviews found