Description
At a Glance
12 x 20 ft grey carport replacement fabric for a peak-roof frame. Fits 600-610 cm / 19.69-20.01 ft long and 362-366 cm / 11.88-12.01 ft wide, with a maximum height of 301 cm / 9.88 ft. Replacement top cover only; frame not included.
12 x 20 ft Carport Replacement Cover, Top Only
This grey replacement cover is made for a 12 x 20 ft carport frame. It replaces the roof fabric while you keep the existing frame, which is the practical choice when the cover has torn, faded, or started to leak but the structure is still sound.

Frame not included. This listing is for the replacement canopy fabric only. The metal frame, legs, and any rigid panels are sold separately. VEVOR also states that this cover is not suitable for arch-shaped frames.
A 12×20 cover that matches the frame, not just the label
Carport sizes vary between brands, and a frame sold as 12×20 can measure slightly differently at the base and at the roof peak. VEVOR publishes a fit range for this cover. Measure the frame before ordering and compare all five dimensions, not only the length and width.
- Frame length: 600-610 cm / 19.69-20.01 ft
- Frame width: 362-366 cm / 11.88-12.01 ft
- Maximum total height: 301 cm / 9.88 ft
- Maximum side height: 200 cm / 6.56 ft
- Maximum slope length: 204 cm / 6.69 ft
If the frame falls outside these ranges, this cover is the wrong fit even when the frame is advertised as a 12×20 carport.
Fabric and weather protection
VEVOR uses 210g PE plastic woven fabric with 48 aluminum eyelets. The perimeter has VEVOR’s strap edge. The cover weighs 15.9 lb / 7.2 kg. VEVOR lists the fabric as waterproof and UV protected for outdoor use.
Waterproof fabric is not the same as a sealed roof. Rain can enter where the cover meets the frame, around the eyelets, and at seams. Keep the cover tensioned so water runs off instead of pooling, and check the roof after heavy rain.
Installation and tensioning
- Set up and inspect the frame first. Remove sharp edges, loose bolts, or damaged tubes that could rub the fabric.
- Unfold the cover over the frame and align the peak and corners before attaching anything.
- Thread the ball bungees through the aluminum eyelets and around the frame. Work from the middle toward the ends so the cover stays centered.
- Tension evenly. A cover that is tight on one side and loose on the other will flap and wear at the eyelets.
Two people make the job easier on a 20 ft cover. Install it on a calm day, and keep the fabric clear of the frame’s sharp corners while pulling it into place.
Weather, storage, and realistic expectations
Remove snow rather than letting it sit, check the bungees after storms, and take the cover down or loosen it when high winds are forecast. The listing does not state a snow load rating. In winter, store the cover dry and folded away from sharp objects. A replacement cover extends the life of a sound frame; it does not turn a light-duty carport into a permanent building.
Why this version
The 12 x 20 size is for wider frames than the 10 x 20 covers. It uses 48 eyelets and weighs 15.9 lb / 7.2 kg. Check the frame width and roof slope carefully: a frame that is 12 ft wide at the base can still differ at the roof, and this cover is cut for the published range.
Ordering
One unit, wholesale pricing. The listed price is our wholesale rate for a single cover. There is no minimum order quantity and no separate tier price, so you can order one replacement or several for a row of frames at the same unit price.
Performance & Applications

























0 reviews for VEVOR 12 x 20 ft Carport Replacement Canopy Cover, Grey, Strap Edge
Customer reviews
No reviews found