SupplyDirectHub

Loading

  • SupplyDirectHub

    Help & Support

    We are here to help you shop with confidence.

    Customer Service

    Store Policies

    Free US ShippingFree to the 48 contiguous US states
    30-Day ReturnsSimple, buyer-friendly policy
    Secure CheckoutEncrypted payment processing

    Follow Us

VEVOR 25 ft Telescoping Flag Pole Kit, Black Aluminum Pole with 3×5 American Flag and In-Ground Sleeve

VEVOR 25 ft Telescoping Flag Pole Kit, Black Aluminum Pole with 3×5 American Flag and In-Ground Sleeve

$78.90Wholesale price, no minimum order

Key Features

Five-section aluminum pole
the 2.17 in / 55 mm mast adjusts between 188-740 cm / 6.17-24.28 ft and weighs 7.72 lb / 3.5 kg for a manageable one-person install.
Twist-lock section joints
rotate each section until it locks, then check that no tube can slide down before raising the flag.
Single, two-flag and half-staff positions
four aluminum clips support common display arrangements without tying the flag permanently to the pole.
PVC sleeve and in-ground base
the set includes a sleeve, plastic plug, gloves, ball finial and hex key so the pole has a defined vertical mounting point.
Fade-resistant 3x5 ft US flag
the included polyester flag has brass grommets and can be removed for cleaning, storage or replacement.

In stock

Genuine ProductWholesale Price, No MinimumSame Manufacturer WarrantyShips from US Warehouse
We accept: VisaMCAmexDiscover
We accept:VISAMCAMEXDISC
Free US ShippingFree to the 48 contiguous US states
Ships in 1-2 Business DaysStandard delivery in 2-6 business days
30-Day ReturnsEasy returns for peace of mind
Manufacturer WarrantyCovered by the VEVOR warranty

Authorized VEVOR ResellerGenuine, factory sealed VEVOR stock

What's in the Box?
  • 1 main pole with end cap
  • 1 ball finial
  • 4 aluminum clips
  • 1 PVC ground sleeve
  • 1 plastic plug
  • 1 3x5 ft American flag
  • 1 pair of gloves
  • 1 user manual
📦 Free shipping to the 48 contiguous US states · Ships within 1-3 business days, arrives in 2-5 business days · 30-day returns and manufacturer warranty
SKU: QGTJSSSHS25YGPBV8V0 Category:

Quick Answer

This black 25 ft telescoping flag pole kit uses a 2.17 in / 55 mm aluminum pole and includes a 3x5 ft American flag, four clips and a PVC ground sleeve. It adjusts between 188-740 cm / 6.17-24.28 ft and is intended for a vertical in-ground setup. The listing calls it a 25 ft pole, while the measured graphic reaches 740 cm / 24.28 ft; plan by the measured range.

Description

At a Glance

This black 25 ft telescoping flag pole kit uses a 2.17 in / 55 mm aluminum pole and includes a 3×5 ft American flag, four clips and a PVC ground sleeve. It adjusts between 188-740 cm / 6.17-24.28 ft and is intended for a vertical in-ground setup. The listing calls it a 25 ft pole, while the measured graphic reaches 740 cm / 24.28 ft; plan by the measured range.

UP-QGSS25Item Model NumberTelescopicType5Sections188-740 cm / 6.17-24.28 ftPole LengthBlackColorAluminum AlloyMain Material2.17 in / 55 mmPole Diameter3 x 5 ft American FlagIncluded Flag7.72 lb / 3.5 kgProduct WeightPVC Ground SleeveGround MountNoSolar Light

25 ft Black Telescoping Flag Pole Kit

This 25 ft flag pole is built around a 2.17 in / 55 mm aluminum mast and a complete in-ground kit. The package weighs 7.72 lb / 3.5 kg and includes a 3×5 ft American flag, four aluminum clips, a PVC ground sleeve, plastic plug, gloves, ball finial and user manual. No solar light is included with this model.

25 ft black aluminum flag pole outside a house

What is in the box: 1 main pole with end cap, 1 ball finial, 4 aluminum clips, 1 PVC ground sleeve, 1 plastic plug, 1 3×5 ft American flag, 1 pair of gloves, 1 user manual. The flag pole is designed for a vertical in-ground sleeve; it is not a wall bracket or a vehicle mount.

How tall is the 25 ft pole?

The listed pole range is 188-740 cm / 6.17-24.28 ft. The product is marketed as a 25 ft pole, but the dimension graphic labels the pole as 24 ft / 7300 mm and shows a maximum extension of 740 cm. Treat the measured range as the number to plan with. The measured dimensions matter because the pole is made from telescoping sections, and the height printed on a product name may describe the nominal size rather than the exact extended length. Measure the finished height you need, then leave enough clearance for the flag, finial. Keep the top clear of power lines, tree limbs and roof edges.

For an in-ground installation, also plan the horizontal room the flag needs when the wind changes direction. A pole can be vertical and still be in the wrong place if the flag hits a branch, awning or fence.

Flag, clips and display positions

The four aluminum clips allow a single flag, two flags or a half-staff position. Work with the pole lowered, keep the clips square to the mast, and check the flag is clear of trees, wires and the roofline before extending it.

Ground sleeve and installation

The included PVC sleeve defines the mounting point. Before digging, confirm there are no buried utilities or irrigation lines. Set the sleeve vertically and firm it in place. The sleeve depth is not published for every soil condition. Set it vertically, support it firmly, and follow the manual plus local code. Assemble the ball finial, clips and pole as shown in the manual, then extend the sections gradually instead of forcing a joint.

  1. Check the location for overhead wires, underground services and enough flag clearance.
  2. Set the PVC sleeve vertically and secure it before fitting the pole.
  3. Install the finial and clips, then raise the flag with the pole lowered.
  4. Extend and lock each section, checking for movement before leaving the pole up.

Weather and wind limits

The supplier warns against use in wind above level 8 or in rainstorms. Strong wind puts the load into the flag, clips, pole sections and ground sleeve, so a calm day is the right time to install and adjust the height. When severe weather is forecast, lower the pole and remove the flag. Do not rely on the sleeve alone to keep a tall mast safe in a storm.

Care and storage

Rinse and dry the polyester flag, wipe grit from the aluminum sections, and inspect the clips and grommets before each display. Store the flag separately when wet. If the pole will be down for a long period, clean and dry the sections and keep the sleeve clear of dirt so the pole can be inserted without binding.

Wholesale pricing

One unit, wholesale pricing. The listed price is the wholesale rate for one flag pole kit. There is no minimum order quantity and no separate tier price, so buying one kit and buying several kits use the same listed unit price.

Performance & Applications

25 ft black flag pole twist-lock sections and adjustable range
single flag, two flags and half-staff display modes on the 25 ft pole
flag pole installation with ball, clips, PVC pipe and ground sleeve
25 ft black flag pole in a courtyard, plaza, office or event venue
25 ft black telescoping flag pole dimensions, weight and accessories

Specifications

BrandVEVOR
Item Model NumberUP-QGSS25
Total Length25 ft
ColorBlack
Main MaterialAluminum Alloy
FlagAmerican Flag
Product Weight3.5 kg/7.72 lbs

0 reviews for VEVOR 25 ft Telescoping Flag Pole Kit, Black Aluminum Pole with 3×5 American Flag and In-Ground Sleeve

Customer reviews

No reviews found

No reviews match your current filters. Try adjusting or clearing your filters to see more reviews.

Be the first to review “VEVOR 25 ft Telescoping Flag Pole Kit, Black Aluminum Pole with 3×5 American Flag and In-Ground Sleeve”

Your email address will not be published. Required fields are marked *

0 / 100

Drag & drop files here or browse

Images: up to 5 files, max 5MB each | Videos: up to 2 files, max 50MB each, 60 sec max

Frequently Asked Questions

Q: How tall is the 25 ft pole in use?

A: The measured adjustable range is 188-740 cm / 6.17-24.28 ft. VEVOR labels the product as 25 ft, but the dimension graphic shows 24 ft / 7300 mm and a maximum extension of 740 cm; use the measured range when planning the site.

Q: What flag size is included?

A: The kit includes one 3x5 ft American flag with brass grommets. Remove it before a storm, and inspect the clips and grommets each time you raise it.

Q: Is a solar light included?

A: No. This model is a plain flag pole kit. The light-equipped versions are sold separately, and this page does not claim that a light is in the box.

Q: Does the kit include a ground sleeve?

A: Yes. It includes a PVC pipe or PVC ground sleeve, a plastic plug, four aluminum clips, gloves and the mounting hardware shown in the gallery.

Q: How deep should the PVC sleeve go?

A: The listing does not publish one universal depth. Set the sleeve vertically and firmly as instructed in the manual, and account for soil, frost and local code. Check for utilities before digging.

Q: Can I use it in wind and rain?

A: The supplier advises against use in wind above level 8 or in rainstorms. Lower the pole and remove the flag when severe weather is forecast; an aluminum pole can still bend or dent if it is left exposed.

Q: Can it display one flag, two flags or half staff?

A: Yes. The four aluminum clips allow single-flag, two-flag and half-staff positions. Move the flag only with the pole lowered and secured so you are not reaching overhead.

Q: How many sections does the pole have?

A: The measured graphic shows five telescoping sections. Extend them evenly, lock every joint and check the pole before fitting the flag.

Q: What maintenance does it need?

A: Rinse and dry the flag, wipe the aluminum pole, check every clip and joint, and clear grit from the sleeve. Store the flag separately when it is wet or when the pole will not be used for a long period.

Q: How does the black 25 ft model compare with the other version?

A: This model is the black 25 ft pole at 7.72 lb / 3.5 kg. Compare the linked sibling or the solar-light option when height, color or lighting matters more than the lowest part count.

Questions & Answers