VEVOR 25 ft Solar Flag Pole Kit with 136 LED Light, 3×5 American Flag and In-Ground Sleeve

Description

25 ft Black Telescoping Flag Pole Kit

This 25 ft flag pole is built around a 2.17 in / 55 mm aluminum mast and a complete in-ground kit. The package weighs 9.17 lb / 4.16 kg and includes a 3×5 ft American flag, four aluminum clips, a PVC ground sleeve, plastic plug, gloves, ball finial and user manual. A 136 LED solar light and hex key are also included.

What is in the box: 1 main pole with end cap, 1 ball finial, 4 aluminum clips, 1 PVC ground sleeve, 1 136 LED solar flag pole light, 1 hex key, 1 plastic plug, 1 3×5 ft American flag, 1 pair of gloves, 1 user manual. The flag pole is designed for a vertical in-ground sleeve; it is not a wall bracket or a vehicle mount.

How tall is the 25 ft pole?

The listed pole range is 25 ft / 7550 mm overall. The measured dimensions matter because the pole is made from telescoping sections, and the height printed on a product name may describe the nominal size rather than the exact extended length. Measure the finished height you need, then leave enough clearance for the flag, finial and solar light. Keep the top clear of power lines, tree limbs and roof edges.

For an in-ground installation, also plan the horizontal room the flag needs when the wind changes direction. A pole can be vertical and still be in the wrong place if the flag hits a branch, awning or fence.

Solar light and flag

The 136 LED light mounts above the flag and runs without a household outlet. Choose the dim or bright setting, then place the panel where it gets direct sun. A shaded panel will charge more slowly, and the listing does not promise a fixed nightly runtime. If you need to keep the flag visible after dark in a shaded yard, plan around that limitation rather than treating the light as a mains-powered lamp.

One 3×5 ft American flag is included. Attach it with the supplied clips, keep it clear of trees and overhead wires, and remove it when the pole is lowered for storage or a storm.

Ground sleeve and installation

The included PVC sleeve defines the mounting point. Before digging, confirm there are no buried utilities or irrigation lines. Set the sleeve vertically and firm it in place. The listing does not publish a universal sleeve depth. Make the sleeve vertical, support it firmly, and follow the manual plus local soil and frost conditions. Assemble the ball finial, clips and pole as shown in the manual, then extend the sections gradually instead of forcing a joint.

1. Check the location for overhead wires, underground services and enough flag clearance.
2. Set the PVC sleeve vertically and secure it before fitting the pole.
3. Install the finial and clips, then raise the flag with the pole lowered.
4. Extend and lock each section, checking for movement before leaving the pole up.

Weather and wind limits

The supplier warns against use in wind above level 8 or in rainstorms. Strong wind puts the load into the flag, clips, pole sections and ground sleeve, so a calm day is the right time to install and adjust the height. When severe weather is forecast, lower the pole and remove the flag. Do not rely on the sleeve alone to keep a tall mast safe in a storm.

Care and storage

Rinse and dry the polyester flag, wipe grit from the aluminum sections, and inspect the clips and grommets before each display. Store the flag separately when wet. If the pole will be down for a long period, clean and dry the sections and keep the sleeve clear of dirt so the pole can be inserted without binding.

Wholesale pricing

One unit, wholesale pricing. The listed price is the wholesale rate for one flag pole kit. There is no minimum order quantity and no separate tier price, so buying one kit and buying several kits use the same listed unit price.

Performance & Applications